مني
نجم المنتدي
عدد المساهمات : 222
نقاط : 718
تاريخ التسجيل : 13/03/2011
 |  موضوع: حديث برنامج لعمل سوفتوير وصيانة الجوال Phoenix  السبت يوليو 16, 2011 1:32 am | |
|
تحديث برنامج لعمل سوفتوير وصيانة الجوال Phoenix Service Software 2009 34 14 40684  New
version of Phoenix Service Software is available. This
multi-protocol Service Software supports Nokia CDMA, GSM, TDMA, and
WCDMA products. Service SW installation packages and Technical Bulletins
are available from NOL. Main component versions in the release: ╖ DK2
Driver Version 07.14.0.25 ╖ Nokia Connectivity Cable USB Driver Version
7.1.17.0 (For Win2000 driver version 6.85.15.0) ╖ Flash Update Package
09.048.024 ╖ FLS-x Drivers Version 2.09.28 ╖ FPS-11Version 5.10.0 MAIN
CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2009. 34.10.40495
New Products added ╖ RM-614, RM-615, RM-381, RM-598 , RM-604, RM-582,
RM-521, RM-522, RM-658, RM-638, RM- 606, RM-664, RM-626 New features ╖
Flash Update Package 09.048.024 ╖ RF Final Test û feature added. - If
you can find ôRF Final Testö item from ôTestingö û
menu when product is connected, product supports this function - RF
Final test uses the same product specific configuration file as RF Auto
Tuning and works when same equipment and tools are used - If you
experience problems with either function, please check the other. - If
either one works, please report issue to the product program so that
data package configuration can be checked. Error Corrections &
changes ╖ Login dialog removed ╖ Dead phone USB stability improvements ╖
Autotuning components updated to new version ╖ Label printing
corrections for E72 KNOWN ERRORS & LIMITATIONS ╖ Software
downgrade with Tucson system is only possible for BB 5.0 products
supporting the Data Package 2 concept. ╖ Flashing with FLS-5, SS-46 and
product specific adapter is not supported anymore ╖ If you install old
DCT-4 data packages, Flash Update Package File installation path may be
wrong. This is caused by very old DCT-4 data packages which contain
Flash Update Package and overwrite current information during
installation. If you experience problems when updating FPS-x prommers,
please check that Phoenix ôPrommer maintenanceö is looking
for the files from the correct location which is ôC rogram
FilesCommon FilesNokiaTssFlashö. If not, Phoenix will show
error ôUpdate via ini û file failedö. In this case, select
ôUpdateö from that Phoenix ôPrommer maintenanceö û
UI, browse to correct directory and select ôfpsxupd.iniö for
all other prommers except the FPS-8. Multi Flash has limited
capabilities, launch Multiflash UI first and then connect phones one by
one, do not attempt to Service more than 5 phones at the time ╖ Some
phone models request SIM Lock data to be written in wrong format. You
should use special DLL as a workaround for this product Software
related problem. Please see Service SW Application ôTucson Add-On
Components for SIM Lock versionsö ╖ While performing restore or
variant CHANGE operations with Tucson system firmware update as a
separate activity may increase stability. ╖ Refurbishment flashing and
product code change for RX-51 product requires SX-4 card to be available
╖ FPS-21 flashing for RX-51 works only with TCPIP connection, if FPS-21
prommer HW is older than 10. USB connection works if FPS-21 HW is 10 or
newer. ╖ Please refer to product specific documents and instructions
concerning the limitations of the RX-51 product [ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذا الرابط]
| |
|
